Buyer's Guide

Pull-Out and Torque-Out Records for Sheet Metal Fasteners

Review sheet metal fastener test records by material, thickness, installation, loading direction, sample coverage and failure mode before acceptance.

DRAmetal Engineering Team October 11, 2026 5 min read
Pull-Out and Torque-Out Records for Sheet Metal Fasteners

A report stating that a rivet nut passed a pull-out test can still be incomplete. Which sheet was tested? Was the load applied through the intended axis? Did the insert release, the sheet tear or the bolt fail first? Without those details, a force value is difficult to use for procurement acceptance.

OEM buyers should treat the test record as a description of a specific fastener installation under a defined method. This guide covers the information to agree when sourcing custom mounting plates and other hardware-ready sheet metal assemblies. It does not provide a universal load rating for a thread size.

Name the test before discussing the result

Pull-out resistance and torque-out resistance are different characteristics. A pull-out test applies an axial load to the defined installation. A torque-out test evaluates rotational resistance under its stated method. Neither should be renamed as a generic strength test, and one cannot substitute for the other without an approved technical basis.

Distinguish these from installation torque, recommended screw tightening torque and thread stripping. The units alone may look familiar, but the load path and failure criterion differ. If the buyer requests torque-out evidence, a record showing only an assembly screwdriver setting does not answer that request.

Identify the tested installation

Retain the fastener’s full part number, thread, body configuration, material and grip range. Record the receiving sheet’s material, actual thickness, hole size and finish condition. Include the installation tool and the approved setting reference when they affect the result.

Rivet Nut USA cautions that reference mechanical properties do not guarantee a specific installation. Application testing is therefore a separate task from selecting a catalogue value. For grip selection, use the rivet nut grip-range guide before agreeing the test matrix.

Threaded pulling mandrel aligned with a rivet nut test coupon
The supported coupon and load direction belong in the test definition.

Describe the fixture and failure criterion

The fixture should make the intended test understandable. Record the support arrangement, loading direction, loading method and endpoint. Include the relevant method reference or a controlled procedure identifier. A photograph can help document setup, but it should accompany, not replace, the written test conditions.

Record the observed failure mode as well as the peak or acceptance load. Sheet deformation, insert rotation, fastener pull-through and bolt failure can lead to different engineering decisions. If the fixture or loading screw limits the test, the result may not establish the characteristic originally requested.

Record fieldWhat to retainAvoid accepting only
SpecimenPlate revision, material, thickness and finishA thread size
InstallationFastener reference, hole and setting conditionAn untraceable loose insert
MethodFixture, direction, procedure and endpointA photograph of a test machine
ResultIndividual values, units and failure modesA rounded average with no samples
CoverageSample count and batch relationshipThe phrase “all passed”
DecisionRequirement, disposition and approverAn unexplained green status

Keep sampling and routine inspection separate

Destructive testing consumes the tested joint. Production may also include non-destructive thread checks, visual seating inspection or other defined checks. Describe each operation with its own sample coverage rather than placing a blanket 100% label over the inspection plan.

Specify how samples are selected and whether they represent one material, one thickness and one fastener configuration or several. A report covering five steel coupons cannot automatically release a stainless variant made with a different thickness. The buyer and supplier should agree what changes require another qualification or first-article review.

Torque tool and clamped sheet metal fastener specimen
Rotational resistance needs its own method and result, separate from axial loading.

Read individual results before the conclusion

An average can hide a specimen below the agreed minimum. Review individual values, their units, the acceptance limit and any exclusions. If a sample is rejected as invalid, retain the reason and replacement-test rule. Otherwise, a tidy summary may conceal a changed sample population.

Check whether the criterion is a project minimum, a supplier’s published value or a comparison against an earlier design. Those have different meanings. In the mounting plate customer project, the reported M3 pull-out values belong to the documented project and its batch sampling, not to every M3 fastener DRAmetal may supply.

Separate metal fastener test coupons retained after inspection
Keep specimen identity and the observed joint condition connected to each result.

For the RFQ, request the required test type, method, acceptance threshold, coverage and report format up front. Include the actual material stack and fastener reference. That allows quotations to include comparable verification work and avoids discovering after production that a generic certificate cannot answer the customer’s assembly question.

Need a Custom Sheet Metal Quote?

Send us your CAD drawings — DRAmetal's initial response target is within 24 working hours. Quotation, DFM and lead-time timing depend on file completeness and engineering scope.

GET A FREE QUOTE →
DRAmetal Engineering Team

Team-authored manufacturing guidance. Scope, sources, corrections, and project-status labels follow our engineering content policy.