Agricultural & Heavy Equipment

Agricultural Equipment Parts: Protected, Interchangeable Mounts

Brackets, guards and mounting plates supplied tractor and harvesting-equipment assemblies.

Anonymous Customer Case Study

📅 May 31, 2026 ⏱ 2 min read 🏭 DRAmetal Engineering
Agricultural Equipment Parts: Protected, Interchangeable Mounts — component reference
Component reference image
1.5–3.0 mm Steel thickness
500 parts/month Production quantity
Standardized hole patterns Mounting interfaces

Project Overview

Application Brackets, guards and mounting plates supplied tractor and harvesting-equipment assemblies.
Materials 1.5–3.0 mm Q235 steel; 304 stainless for specified contact components.
Process Route Laser cutting → bending → welding → e-coating / powder coating → assembly → inspection.
Customer Challenge Corrosion, vibration fractures and inconsistent mounting patterns complicated field maintenance.

Brackets, guards and mounting plates supplied tractor and harvesting-equipment assemblies.

The customer’s challenge

Corrosion, vibration fractures and inconsistent mounting patterns complicated field maintenance.

Material and fabrication route

1.5–3.0 mm Q235 steel; 304 stainless for specified contact components.

Process route: Laser cutting → bending → welding → e-coating / powder coating → assembly → inspection.

Manufacturing changes

A coordinated e-coat and powder-coat system, reinforced geometry, standardized holes and modular interfaces addressed the issues.

Engineering analysis

The improvement addressed replacement in service as well as fabrication. Common mounting patterns made the parts interchangeable, reinforced geometry addressed vibration damage, and coordinated finishing addressed the exposed steel surfaces. A similar order should keep these three requirements linked: a durable guard still creates maintenance work if its replacement bracket does not match the installed mounting points.

Inspection and project results

The parts completed the reported vibration test without fracture, and common interfaces improved replacement and maintenance.

Project measurement or production detailRecorded value
Steel thickness1.5–3.0 mm
Production quantity500 parts/month
Mounting interfacesStandardized hole patterns

These figures describe the project configuration and production scope above. Dimensional, material and production details are identified separately from performance tests. For a new order, the inspection method and acceptance criteria should be agreed against the released drawings.

Planning a similar OEM component

A useful RFQ for this application should make the following interfaces and acceptance requirements clear:

  • Installed hole patterns.
  • Vibration and exposure conditions.
  • Coating system and masked interfaces.
  • Replacement part identification.

Include the current drawing revision, mating-component information, quantities and required delivery sequence. Identifying unresolved requirements at quotation stage helps distinguish fabrication work from the equipment-level checks that the project needs.

For related manufacturing support, review our Agricultural Equipment Parts and sheet metal quality capabilities. Use the existing quotation form below to share the drawing package for review.

More Manufacturing Projects

Explore More Manufacturing Work