Custom baffles and blanking panels separated supply and exhaust air inside data-center racks.
The customer’s challenge
Hot server exhaust recirculated into intake paths, raising inlet temperatures.
Material and fabrication route
0.8 mm galvanized steel.
Process route: Laser cutting → bending → hardware insertion → inspection.
Manufacturing changes
Internal baffles redirected exhaust, while blanking panels closed unused rack positions to limit bypass paths.
Engineering analysis
Unused rack positions and internal bypass paths allowed exhaust air to return to the intake side. The baffles and blanking panels addressed those specific paths instead of adding an unsupported cooling-capacity claim to a sheet metal part. The recorded inlet-temperature reduction is meaningful for this rack arrangement. A comparable project needs the populated rack layout and airflow boundaries to judge whether the same approach is relevant.
Inspection and project results
Server inlet temperature fell by 3–5°C in the project tests. The revised arrangement eliminated the observed hot-air return and improved temperature distribution.
| Project measurement or production detail | Recorded value |
|---|---|
| Inlet-temperature reduction | 3–5°C |
| Unused-position blanking | 100% |
| Rack format | 19-inch |
These figures describe the project configuration and production scope above. Dimensional, material and production details are identified separately from performance tests. For a new order, the inspection method and acceptance criteria should be agreed against the released drawings.
Planning a similar OEM component
A useful RFQ for this application should make the following interfaces and acceptance requirements clear:
- Populated rack layout.
- Unused positions and bypass gaps.
- Intake and exhaust interfaces.
- Temperature measurement locations and load condition.
Include the current drawing revision, mating-component information, quantities and required delivery sequence. Identifying unresolved requirements at quotation stage helps distinguish fabrication work from the equipment-level checks that the project needs.
For related manufacturing support, review our Custom Sheet Metal Baffles & Air Deflectors and sheet metal quality capabilities. Use the existing quotation form below to share the drawing package for review.