Medical & Diagnostic Equipment

Medical Cart Frame: One Structure for Two Equipment Models

A medical cart project required a common main frame, drawer fronts and side covers for two equipment models with different mounting interfaces.

Anonymous Customer Case Study

📅 September 26, 2026 ⏱ 2 min read 🏭 DRAmetal Engineering
Medical Cart Frame: One Structure for Two Equipment Models — component reference
Component reference image
12 Common frame part types
3 Model-specific part types
≥80 kg Load test
200 carts/month Production quantity

Project Overview

Application A medical cart project required a common main frame, drawer fronts and side covers for two equipment models with different mounting interfaces.
Materials 1.5 mm Q235 cold-rolled steel; 2.0 mm aluminum panels.
Process Route Laser cutting → bending → welding → grinding → pickling and phosphating → powder coating → assembly and inspection.
Customer Challenge The original design required separate cart-frame tooling for each equipment model, increasing cost and extending the production schedule.

A medical cart project required a common main frame, drawer fronts and side covers for two equipment models with different mounting interfaces.

The customer’s challenge

The original design required separate cart-frame tooling for each equipment model, increasing cost and extending the production schedule.

Material and fabrication route

1.5 mm Q235 cold-rolled steel; 2.0 mm aluminum panels.

Process route: Laser cutting → bending → welding → grinding → pickling and phosphating → powder coating → assembly and inspection.

Manufacturing changes

An adjustable mounting crossmember and compatible hole patterns allowed both models to use one frame. A small set of adapter plates accommodated the model-specific interfaces.

Engineering analysis

The commercial benefit came from sharing the main structure without forcing different equipment models onto an unsuitable interface. Adjustable crossmembers and a small adapter family separated common frame features from model-specific details. The recorded counts describe part types, not production quantity or a calculated commonality percentage. This distinction makes the case useful for OEMs deciding which interfaces to standardize across a product family.

Inspection and project results

The redesign removed the need for a second frame-tooling set. The customer could configure the cart according to the equipment ordered.

Project measurement or production detailRecorded value
Common frame part types12
Model-specific part types3
Load test≥80 kg
Production quantity200 carts/month

These figures describe the project configuration and production scope above. Dimensional, material and production details are identified separately from performance tests. For a new order, the inspection method and acceptance criteria should be agreed against the released drawings.

Planning a similar OEM component

A useful RFQ for this application should make the following interfaces and acceptance requirements clear:

  • Model-specific equipment interfaces.
  • Common frame drawing and load cases.
  • Adapter-plate and hole-pattern variants.
  • Configuration and part-number control.

Include the current drawing revision, mating-component information, quantities and required delivery sequence. Identifying unresolved requirements at quotation stage helps distinguish fabrication work from the equipment-level checks that the project needs.

For related manufacturing support, review our Medical Cart Sheet Metal Fabrication and sheet metal quality capabilities. Use the existing quotation form below to share the drawing package for review.

More Manufacturing Projects

Explore More Manufacturing Work