High-Performance Nickel Alloy Fabrication for
Extreme-Environment Applications
Drawing-controlled processes for Inconel 625 / 718, Monel 400 and Hastelloy C-276 — engineered for oil & gas downhole, aerospace turbines and chemical reactors operating above 1000°C.
- Service Temperatures Above 1000°C
- Welding requirements and qualification reviewed by RFQ
- Initial Response Target: 24 Working Hours
RFQs Reviewed for Oil & Gas, Aerospace & Chemical Applications Processing OEMs Worldwide
Material Overview
Nickel-based superalloys maintain strength and corrosion resistance at service temperatures above 1000°C, where stainless steels and titanium fail. Our portfolio covers the most-specified industrial grades — Inconel 600 / 625 / 718, Monel 400, Hastelloy C-276 and Incoloy 800H — covering oil & gas downhole tools, jet engine components, sour-gas service and chemical reactor internals with full mill traceability.
Physical Properties
- Thermal Conductivity
- 9.8 W/m·K
- Electrical Resistivity
- 1.29×10⁻⁶ Ω·m
- Specific Heat
- 410 J/kg·K
- Young's Modulus
- 208 GPa
- Density
- 8.44 g/cm³
- Thermal Expansion
- 13.0 µm/m·K
Nickel Alloy Grade Specifications
Mechanical and chemical properties of available grades. All values measured at room temperature (20°C) per ASTM B168 / B443 / B127 / B575 / AMS 5596 international standards.
| Grade | Standard | Composition | Tensile MPa | Yield MPa | Elong. % | Hardness | Key Characteristics |
|---|---|---|---|---|---|---|---|
| Inconel 600 | ASTM B168 | Ni 72%, Cr 16%, Fe 8% | 655 | 240 | 40 | HB 150 | Heat-treat baskets, furnace parts |
| Inconel 625 | ASTM B443 | Ni 58%, Cr 22%, Mo 9%, Nb 3.5% | 930 | 517 | 42 | HB 220 | Marine, chemical, jet engines |
| Inconel 718 | AMS 5596 | Ni 53%, Cr 19%, Fe 18%, Nb 5% | 1240 | 1036 | 12 | HB 360 | Aerospace turbines, age-hardenable |
| Monel 400 | ASTM B127 | Ni 63%, Cu 31% | 550 | 240 | 40 | HB 140 | Seawater, HF acid service |
| Hastelloy C-276 | ASTM B575 | Ni 57%, Mo 16%, Cr 16%, Fe 5% | 790 | 355 | 60 | HB 200 | Strongest corrosion resistance |
| Incoloy 800H | ASTM B409 | Ni 32%, Cr 21%, Fe 44% | 520 | 210 | 40 | HB 140 | High-temp creep resistance |
Tensile Strength by Grade
Visual comparison of ultimate tensile strength (MPa) across available nickel superalloy grades.
What We Can Do With This Material
Available Surface Treatments
- Pickling
- Passivation
- Mirror Polishing
- Electropolishing
- Sandblasting
- Vacuum Heat Treatment
Common Applications
- Oil & Gas Downhole
- Aerospace Engines
- Chemical Reactors
- Nuclear Power
- Gas Turbines
- Pollution Control
Start Your Nickel Alloy Fabrication Project
Submit your CAD drawings for RFQ review. The initial response target is within 24 working hours; DFM and quotation timing depend on file completeness and engineering scope. Heat treatment, welding qualification and mill-traceability requirements are confirmed before order placement.
GET IN TOUCH WITH US