Precision Stainless Steel Fabrication for
Medical & Food Industries
Drawing-controlled fabrication, mirror polishing and passivation options for 304 / 316 / 316L stainless steel parts with customer-specified cleanable surfaces.
- Food-contact or medical requirements reviewed by RFQ
- Polishing & Passivation Route by RFQ
- Initial Response Target: 24 Working Hours
RFQs Reviewed for Medical, Food Processing & Marine Applications Worldwide
Material Overview
Austenitic and ferritic stainless steels deliver superior corrosion resistance, hygienic surfaces and high-temperature performance. We supply 304 / 316 / 316L food-grade and 430 cost-effective ferritic in mill, brushed and mirror finishes — engineered for medical devices, food processing equipment and marine-grade applications.
Physical Properties
- Thermal Conductivity
- 16.2 W/m·K
- Electrical Resistivity
- 7.2×10⁻⁷ Ω·m
- Specific Heat
- 500 J/kg·K
- Young's Modulus
- 193 GPa
- Poisson Ratio
- 0.30
- Thermal Expansion
- 17.3 µm/m·K
Stainless Steel Grade Specifications
Mechanical and chemical properties of available grades. All values measured at room temperature (20°C) per ASTM A240 international standards.
| Grade | Standard | Composition | Tensile MPa | Yield MPa | Elong. % | Hardness | Key Characteristics |
|---|---|---|---|---|---|---|---|
| SS304 | ASTM A240 | Cr 18%, Ni 8% | 515 | 205 | 40 | HB 201 | General purpose, food-safe, weldable |
| SS304L | ASTM A240 | Cr 18%, Ni 8%, Low C | 485 | 170 | 40 | HB 201 | Welded structures, anti-sensitization |
| SS316 | ASTM A240 | Cr 16%, Ni 10%, Mo 2% | 515 | 205 | 40 | HB 217 | Marine, chemical, pharmaceutical |
| SS316L | ASTM A240 | Cr 16%, Ni 10%, Mo 2%, Low C | 485 | 170 | 40 | HB 217 | Medical implants, surgical tools |
| SS430 | ASTM A240 | Cr 17% (ferritic) | 450 | 205 | 22 | HB 183 | Decorative, cost-effective, magnetic |
| SS201 | ASTM A240 | Cr 17%, Mn 6.5% | 655 | 310 | 40 | HB 241 | Lower nickel, budget alternative |
Tensile Strength by Grade
Visual comparison of ultimate tensile strength (MPa) across available stainless steel grades.
RFQ Planning for This Material
Available Surface Treatments
- 2B Mill Finish
- BA Bright
- No.4 Brushed
- No.8 Mirror
- Bead Blasted
- Electropolished
- Passivation
Common Applications
- Medical Devices
- Food Processing
- Marine Hardware
- Pharmaceutical
- Architecture
- Chemical Equipment
Start Your Stainless Steel Fabrication Project
Submit your CAD drawings for RFQ review. The initial response target is within 24 working hours; DFM and quotation timing depend on file completeness and engineering scope. Polishing, passivation and material-traceability requirements are confirmed before order placement.
GET IN TOUCH WITH US