Packaging OEMs · Logistics Equipment · Assembly Conveyors

Custom Conveyor
Metal Side Guides
Controlled Rail Paths, Splices & Adjustment Interfaces

Source fabricated guide rails, formed side plates and adjustable supports around your conveyor's actual product path. DRAmetal supplies drawing-controlled metalwork and agreed hardware for repeat OEM builds. Wear-strip selection, complete conveyor performance and operating approval remain defined parts of the project—not assumptions hidden in a rail quotation. Custom mounting brackets · Customer side-guide project

✓ Build-to-print scope
✓ Inspection by RFQ
✓ OEM approval boundary
Straight and curved stainless conveyor side guides with adjustable mounting brackets on a workshop bench
RFQ Project-defined
Straight Rails
Released contact interfaces
Curved Sections
Defined radius and transitions
Adjustable Supports
Usable travel and clamp faces
Matched Kits
Splices, stops and hardware
01 / What We Fabricate

Guide Metalwork Built Around the Conveyed Product Path

A side guide is more than a strip beside a belt. Its contact face, supports, joints and adjustment positions work together. We fabricate the released metal components and coordinate their interfaces with the OEM's selected contact materials and conveyor references. The scope is precision metalwork, not retail replacement rail, polymer strip manufacture or a complete conveying line.

Metal rails and formed side plates

Straight sections with specified profiles, mounting patterns and edge condition. Define whether metal contacts the product directly or supports a separate selected contact strip.

Curved guides and transition pieces

Formed curved sections with identified functional radii, endpoints and tangency. Review the finished profile and the relationship to adjacent straight or curved guides.

Adjustable mounting brackets

Fabricated brackets with approved slots, clamping areas and frame interfaces. Usable guide movement is evaluated with the complete rail and hardware stack.

Splices and changeover hardware

Backing plates, controlled joints, setup stops and agreed retention features packaged with defined part identities and revision-controlled assembly requirements.

Send the Contact Path and the Complete Mounting Stack

Include the conveyor layout, product envelope, guide settings, rail profiles, bracket interfaces, selected wear strips, quantities and acceptance requirements. A clear interface package supports a useful fabrication quotation without relying on assumed operating conditions.

02 / Guide Configurations

Choose the Rail Form and the Support Arrangement Together

These component forms illustrate the metalwork scope. Actual contact geometry, material, bracket spacing and acceptance follow the approved equipment drawings and operating inputs.

Straight Metal Guide Rails Straight Path

Straight Metal Guide Rails

Formed rails and side plates with controlled mounting features and deburred contact-region edges. The final contact relationship includes any customer-selected wear strip.

  • Profile Released functional section
  • Mounting Frame and bracket references
  • Check Finished contact-face position
Curved & Transition Side Guides Curved Path

Curved & Transition Side Guides

Radius-controlled guide sections with defined ends and mating transitions. Specify the named surface, support state and inspection method for the curve.

  • Radius Named contact or metal surface
  • Ends Position and tangent relationship
  • Check Profile and joined transition
Slotted Brackets & Setup Stops Adjustment

Slotted Brackets & Setup Stops

Supports for released guide positions, with appropriate clamping faces and selected hardware. Positive location and clamping functions remain explicit.

  • Travel Required assembled positions
  • Clamp Approved hardware stack
  • Check Limits, access and seating
Matched Rail & Bracket Packages OEM Kits

Matched Rail & Bracket Packages

Rails, brackets, splice plates and specified hardware grouped by equipment station or format. Clearly separate purchased contact strips and customer-supplied items.

  • Identity Station and handed parts
  • BOM Fabricated and purchased scope
  • Check Configured assembly review
03 / Technical Capabilities

RFQ Inputs for Conveyor Guide Metalwork

Conveyor and product path Equipment layout, approved path reference, conveyed-product envelope, guide contact height and all required width or format settings.
Contact material Metal contact face or selected wear strip, approved section, attachment method, replacement access and responsibility for contact-material qualification.
Rail geometry Section profile, material grade and thickness, straight lengths, named curve radii, endpoints, handed details and finish requirements.
Mounting interfaces Frame reference, bracket pattern, support locations, locating features, spacers and permitted adjustment before final fastening.
Slots and clamping Required assembled travel, selected bolts and washers or clamp elements, supported seating area, tool access and approved fastening procedure.
Splice geometry Travel direction, joint locations, project limits for gap or step, tangent transitions, edge treatment and the relationship of metal and wear-strip joints.
Changeover details Format identities, setup references, stops or spacers, retained hardware requirements and any agreed repeatability evaluation.
Acceptance and supply Part inspection and assembly trial scope, fixture references, sample quantities, operating evaluation responsibility, station-level BOM and packing instructions.
04 / Manufacturing Process

From Conveyor References to a Repeatable Guide Kit

01

Map the functional path

Review the conveyed-product envelope and the approved conveyor reference. Separate metal support geometry from selected contact material and system-level operating requirements.

02

Release rails and interfaces

Define profiles, curves, joint details and mounting references together. Record handed sections and any distinct format or station configurations before fabrication.

03

Cut and form the metalwork

Produce the specified rail and bracket geometry, controlling local edges, curve transitions and mounting relationships. Confirm the first-article forming route for the selected material.

04

Finish and assemble components

Apply the released finish and install approved hardware. Review contact faces, clamping seats and any wear-strip interfaces in the delivered condition.

05

Inspect the intended configuration

Measure part geometry and check the agreed assembly references, splice relationships and adjustment positions. Keep dimensional results separate from conveyor operating trials.

06

Identify and protect the package

Update accepted corrections, identify station and handed parts, protect long rails and curve endpoints, and pack the hardware against the released assembly BOM.

05 / Why It Matters

Details That Turn Individual Rails into an Installable Assembly

Successful rail fabrication depends on controlling the relationship between parts, not only their outer dimensions.

Metal versus contact surface

A wear strip changes the functional guide face. Keep its identity and installed section attached to the rail definition so a replacement does not silently change the product path.

Usable slot travel

Check the complete assembly at its required limits. Washer support, bend clearance and tool access can restrict movement before the bolt reaches the end of the slot.

Splices without hidden discontinuities

Define gap, step, edge treatment and transition direction for the actual product. A correct hole pattern alone does not prove the assembled contact path is suitable.

Repeatable settings with evidence

Separate stops that locate from clamps that retain. Record the actual changeover trial and configuration before making any claim about repeatability or adjustment time.

Customer Project

Conveyor Side Guides: Alignment and Adjustable Mounting

Materials, fabrication decisions and results for an anonymous customer project.

Conveyor Side Guides: Alignment and Adjustable Mounting — component reference

Component reference image

The Customer Challenge

A 48-rail conveyor side-guide project covering sampled straightness, adjustable bracket fit, joint continuity and recorded edge and bolt corrections.

Project Measurements & Details

48 railsDelivered 1000 mm guide sections
5 railsProduction geometry sample
≤0.8 mm / 1 mRecorded rail straightness

Results apply to the project configuration described on the linked page.

Read the Customer Project →
07 / Why Choose Us

Precision Guide Components for Repeat Equipment Builds

01

Clear commercial scope

Quote metal rails, brackets, hardware and selected purchased interfaces separately. Identify whether the order is for lengths, individual parts, matched pairs or complete station kits.

02

Assembly-aware fabrication

Review the frame-to-bracket-to-rail reference chain and the finished contact face. This helps expose incompatible assumptions before the first production kit is assembled.

03

Project-specific inspection

Agree profile coverage, support state, splice measurements and required settings. Retain sample quantities and actual configurations so records remain useful to the OEM.

04

Controlled repeat supply

Keep accepted rail, bracket, contact-strip and hardware changes in one revision package. Packing and identification support the intended installation sequence and handed arrangement.

09 / FAQ

OEM Conveyor Side-Guide Purchasing Questions

Do you supply complete conveyors or retail replacement guide rails?

This page focuses on custom fabricated metal guide components and agreed OEM kits. Provide the equipment interface and drawing package. Complete conveyor design, drives, controls and retail replacement compatibility are separate scopes.

Can a rail package include replaceable wear strips?

Include the selected strip identity, section, attachment method and supply responsibility in the RFQ. We coordinate the fabricated metal interface with the approved component; contact-material selection and qualification must match the application.

What is needed to quote curved side guides?

Provide the named surface radius, section, endpoints, tangent transitions, support locations and material. State the free or installed measurement condition and the profile-inspection requirement. A nominal radius alone is insufficient.

How should adjustable bracket travel be specified?

State the required positions of the assembled contact face. The slot, fastener, washer support and surrounding geometry determine usable movement. Review all required settings with the complete rail and bracket stack.

Can you guarantee a guide will never cause product jams?

Product handling depends on the complete conveyor, actual product range and operating conditions. We fabricate and inspect the released metalwork and support agreed assembly checks. Any operating claim needs the applicable project evaluation.

Can you supply repeated-format stops and retained hardware?

Yes, specify the locating method, required settings, hardware identities and retention needs. Agree a repeatability trial where required, including the sequence, repetitions and measured contact-face locations.

Get Started

Build Your Next
OEM Conveyor Guide Package

Share the conveyor path, rail and bracket drawings, selected contact strips, settings, quantities, finish and inspection scope for an engineering quotation.

For supplier qualification, specify the required standard and project scope. Confirm the applicable certificate holder, manufacturing site and document coverage before order placement.